主頁 > 後端開發 > 驅動開發：Win10列舉完整SSDT地址表

驅動開發：Win10列舉完整SSDT地址表

2022-10-20 06:11:53 後端開發

在前面的博文《驅動開發：Win10內核列舉SSDT表基址》中已經教大家如何尋找SSDT表基地址了，找到后我們可根據序號獲取到指定SSDT函式的原始地址，而如果需要輸出所有SSDT表資訊，則可以定義字串串列，以此回圈呼叫GetSSDTFunctionAddress()函式得到，當然在此之間也可以呼叫系統提供的MmGetSystemRoutineAddress()函式順便把當前地址拿到，并通過回圈方式得到完整的SSDT串列，

呼叫MmGetSystemRoutineAddress()得到當前地址很容易實作，只需要將函式名字串通過RtlInitUnicodeString()格式化一下即可，

// 署名權
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: [email protected]

#include <ntifs.h>

VOID UnDriver(PDRIVER_OBJECT driver)
{
	DbgPrint(("驅動程式卸載成功! \n"));
}

NTSTATUS DriverEntry(PDRIVER_OBJECT DriverObject, PUNICODE_STRING RegistryPath)
{
	DbgPrint("hello lyshark.com \n");

	// 獲取SSDT起源地址
	UNICODE_STRING uncode;
	RtlInitUnicodeString(&uncode, L"NtOpenFile");
	PULONGLONG source_address = MmGetSystemRoutineAddress(&uncode);
	DbgPrint("[LyShark] NtOpenFile起源地址 = %p \n", source_address);

	DriverObject->DriverUnload = UnDriver;
	return STATUS_SUCCESS;
}

代碼獲得NtOpenFile這個函式的記憶體地址，輸出效果如下所示：

根據上一章節的內容擴展，列舉完整SSDT表我們可以這樣來實作，

// 署名權
// right to sign one's name on a piece of work
// PowerBy: LyShark
// Email: [email protected]

#include <ntifs.h>
#pragma intrinsic(__readmsr)

typedef struct _SYSTEM_SERVICE_TABLE
{
	PVOID     ServiceTableBase;
	PVOID     ServiceCounterTableBase;
	ULONGLONG   NumberOfServices;
	PVOID     ParamTableBase;
} SYSTEM_SERVICE_TABLE, *PSYSTEM_SERVICE_TABLE;

ULONGLONG ssdt_base_aadress;
PSYSTEM_SERVICE_TABLE KeServiceDescriptorTable;

typedef UINT64(__fastcall *SCFN)(UINT64, UINT64);
SCFN scfn;

// 解密演算法
VOID DecodeSSDT()
{
	UCHAR strShellCode[36] = "\x48\x8B\xC1\x4C\x8D\x12\x8B\xF8\xC1\xEF\x07\x83\xE7\x20\x4E\x8B\x14\x17\x4D\x63\x1C\x82\x49\x8B\xC3\x49\xC1\xFB\x04\x4D\x03\xD3\x49\x8B\xC2\xC3";
	/*
	48:8BC1                  | mov rax,rcx                             |  rcx=index
	4C:8D12                  | lea r10,qword ptr ds:[rdx]              |  rdx=ssdt
	8BF8                     | mov edi,eax                             |
	C1EF 07                  | shr edi,7                               |
	83E7 20                  | and edi,20                              |
	4E:8B1417                | mov r10,qword ptr ds:[rdi+r10]          |
	4D:631C82                | movsxd r11,dword ptr ds:[r10+rax*4]     |
	49:8BC3                  | mov rax,r11                             |
	49:C1FB 04               | sar r11,4                               |
	4D:03D3                  | add r10,r11                             |
	49:8BC2                  | mov rax,r10                             |
	C3                       | ret                                     |
	*/
	scfn = ExAllocatePool(NonPagedPool, 36);
	memcpy(scfn, strShellCode, 36);
}

// 獲取 KeServiceDescriptorTable 首地址
ULONGLONG GetKeServiceDescriptorTable()
{
	// 設定起始位置
	PUCHAR StartSearchAddress = (PUCHAR)__readmsr(0xC0000082) - 0x1806FE;

	// 設定結束位置
	PUCHAR EndSearchAddress = StartSearchAddress + 0x8192;
	// DbgPrint("掃描起始地址: %p --> 掃描結束地址: %p \n", StartSearchAddress, EndSearchAddress);

	PUCHAR ByteCode = NULL;

	UCHAR OpCodeA = 0, OpCodeB = 0, OpCodeC = 0;
	ULONGLONG addr = 0;
	ULONG templong = 0;

	for (ByteCode = StartSearchAddress; ByteCode < EndSearchAddress; ByteCode++)
	{
		// 使用MmIsAddressValid()函式檢查地址是否有頁面錯誤
		if (MmIsAddressValid(ByteCode) && MmIsAddressValid(ByteCode + 1) && MmIsAddressValid(ByteCode + 2))
		{
			OpCodeA = *ByteCode;
			OpCodeB = *(ByteCode + 1);
			OpCodeC = *(ByteCode + 2);

			// 對位元征值 尋找 nt!KeServiceDescriptorTable 函式地址
			// LyShark.com
			// 4c 8d 15 e5 9e 3b 00  lea r10,[nt!KeServiceDescriptorTable (fffff802`64da4880)]
			// 4c 8d 1d de 20 3a 00  lea r11,[nt!KeServiceDescriptorTableShadow (fffff802`64d8ca80)]
			if (OpCodeA == 0x4c && OpCodeB == 0x8d && OpCodeC == 0x15)
			{
				// 獲取高位地址fffff802
				memcpy(&templong, ByteCode + 3, 4);

				// 與低位64da4880地址相加得到完整地址
				addr = (ULONGLONG)templong + (ULONGLONG)ByteCode + 7;
				return addr;
			}
		}
	}
	return  0;
}

// 得到函式相對偏移地址
ULONG GetOffsetAddress(ULONGLONG FuncAddr)
{
	ULONG dwtmp = 0;
	PULONG ServiceTableBase = NULL;
	if (KeServiceDescriptorTable == NULL)
	{
		KeServiceDescriptorTable = (PSYSTEM_SERVICE_TABLE)GetKeServiceDescriptorTable();
	}
	ServiceTableBase = (PULONG)KeServiceDescriptorTable->ServiceTableBase;
	dwtmp = (ULONG)(FuncAddr - (ULONGLONG)ServiceTableBase);
	return dwtmp << 4;
}

// 根據序號得到函式地址
ULONGLONG GetSSDTFunctionAddress(ULONGLONG NtApiIndex)
{
	ULONGLONG ret = 0;
	if (ssdt_base_aadress == 0)
	{
		// 得到ssdt基地址
		ssdt_base_aadress = GetKeServiceDescriptorTable();
	}
	if (scfn == NULL)
	{
		DecodeSSDT();
	}
	ret = scfn(NtApiIndex, ssdt_base_aadress);
	return ret;
}

// 查詢函式系統地址
ULONG_PTR QueryFunctionSystemAddress(PWCHAR name)
{
	UNICODE_STRING na;
	ULONG_PTR address;
	RtlInitUnicodeString(&na, name);
	address = (ULONG_PTR)MmGetSystemRoutineAddress(&na);
	return address;
}

VOID UnDriver(PDRIVER_OBJECT driver)
{
	DbgPrint(("驅動程式卸載成功! \n"));
}

NTSTATUS DriverEntry(PDRIVER_OBJECT DriverObject, PUNICODE_STRING RegistryPath)
{
	DbgPrint("hello lyshark.com \n");

	char *SSDT[464] = { "NtAccessCheck", "NtWorkerFactoryWorkerReady", "NtAcceptConnectPort", "NtMapUserPhysicalPagesScatter", "NtWaitForSingleObject", "NtCallbackReturn", "NtReadFile", "NtDeviceIoControlFile", "NtWriteFile", "NtRemoveIoCompletion", "NtReleaseSemaphore", "NtReplyWaitReceivePort", "NtReplyPort", "NtSetInformationThread", "NtSetEvent", "NtClose", "NtQueryObject", "NtQueryInformationFile", "NtOpenKey", "NtEnumerateValueKey", "NtFindAtom", "NtQueryDefaultLocale", "NtQueryKey", "NtQueryValueKey", "NtAllocateVirtualMemory", "NtQueryInformationProcess", "NtWaitForMultipleObjects32", "NtWriteFileGather", "NtSetInformationProcess", "NtCreateKey", "NtFreeVirtualMemory", "NtImpersonateClientOfPort", "NtReleaseMutant", "NtQueryInformationToken", "NtRequestWaitReplyPort", "NtQueryVirtualMemory", "NtOpenThreadToken", "NtQueryInformationThread", "NtOpenProcess", "NtSetInformationFile", "NtMapViewOfSection", "NtAccessCheckAndAuditAlarm", "NtUnmapViewOfSection", "NtReplyWaitReceivePortEx", "NtTerminateProcess", "NtSetEventBoostPriority", "NtReadFileScatter", "NtOpenThreadTokenEx", "NtOpenProcessTokenEx", "NtQueryPerformanceCounter", "NtEnumerateKey", "NtOpenFile", "NtDelayExecution", "NtQueryDirectoryFile", "NtQuerySystemInformation", "NtOpenSection", "NtQueryTimer", "NtFsControlFile", "NtWriteVirtualMemory", "NtCloseObjectAuditAlarm", "NtDuplicateObject", "NtQueryAttributesFile", "NtClearEvent", "NtReadVirtualMemory", "NtOpenEvent", "NtAdjustPrivilegesToken", "NtDuplicateToken", "NtContinue", "NtQueryDefaultUILanguage", "NtQueueApcThread", "NtYieldExecution", "NtAddAtom", "NtCreateEvent", "NtQueryVolumeInformationFile", "NtCreateSection", "NtFlushBuffersFile", "NtApphelpCacheControl", "NtCreateProcessEx", "NtCreateThread", "NtIsProcessInJob", "NtProtectVirtualMemory", "NtQuerySection", "NtResumeThread", "NtTerminateThread", "NtReadRequestData", "NtCreateFile", "NtQueryEvent", "NtWriteRequestData", "NtOpenDirectoryObject", "NtAccessCheckByTypeAndAuditAlarm", "NtQuerySystemTime", "NtWaitForMultipleObjects", "NtSetInformationObject", "NtCancelIoFile", "NtTraceEvent", "NtPowerInformation", "NtSetValueKey", "NtCancelTimer", "NtSetTimer", "NtAccessCheckByType", "NtAccessCheckByTypeResultList", "NtAccessCheckByTypeResultListAndAuditAlarm", "NtAccessCheckByTypeResultListAndAuditAlarmByHandle", "NtAcquireProcessActivityReference", "NtAddAtomEx", "NtAddBootEntry", "NtAddDriverEntry", "NtAdjustGroupsToken", "NtAdjustTokenClaimsAndDeviceGroups", "NtAlertResumeThread", "NtAlertThread", "NtAlertThreadByThreadId", "NtAllocateLocallyUniqueId", "NtAllocateReserveObject", "NtAllocateUserPhysicalPages", "NtAllocateUuids", "NtAllocateVirtualMemoryEx", "NtAlpcAcceptConnectPort", "NtAlpcCancelMessage", "NtAlpcConnectPort", "NtAlpcConnectPortEx", "NtAlpcCreatePort", "NtAlpcCreatePortSection", "NtAlpcCreateResourceReserve", "NtAlpcCreateSectionView", "NtAlpcCreateSecurityContext", "NtAlpcDeletePortSection", "NtAlpcDeleteResourceReserve", "NtAlpcDeleteSectionView", "NtAlpcDeleteSecurityContext", "NtAlpcDisconnectPort", "NtAlpcImpersonateClientContainerOfPort", "NtAlpcImpersonateClientOfPort", "NtAlpcOpenSenderProcess", "NtAlpcOpenSenderThread", "NtAlpcQueryInformation", "NtAlpcQueryInformationMessage", "NtAlpcRevokeSecurityContext", "NtAlpcSendWaitReceivePort", "NtAlpcSetInformation", "NtAreMappedFilesTheSame", "NtAssignProcessToJobObject", "NtAssociateWaitCompletionPacket", "NtCallEnclave", "NtCancelIoFileEx", "NtCancelSynchronousIoFile", "NtCancelTimer2", "NtCancelWaitCompletionPacket", "NtCommitComplete", "NtCommitEnlistment", "NtCommitRegistryTransaction", "NtCommitTransaction", "NtCompactKeys", "NtCompareObjects", "NtCompareSigningLevels", "NtCompareTokens", "ArbPreprocessEntry", "NtCompressKey", "NtConnectPort", "NtConvertBetweenAuxiliaryCounterAndPerformanceCounter", "ArbAddReserved", "NtCreateDebugObject", "NtCreateDirectoryObject", "NtCreateDirectoryObjectEx", "NtCreateEnclave", "NtCreateEnlistment", "NtCreateEventPair", "NtCreateIRTimer", "NtCreateIoCompletion", "NtCreateJobObject", "ArbAddReserved", "NtCreateKeyTransacted", "NtCreateKeyedEvent", "NtCreateLowBoxToken", "NtCreateMailslotFile", "NtCreateMutant", "NtCreateNamedPipeFile", "NtCreatePagingFile", "NtCreatePartition", "NtCreatePort", "NtCreatePrivateNamespace", "NtCreateProcess", "NtCreateProfile", "NtCreateProfileEx", "NtCreateRegistryTransaction", "NtCreateResourceManager", "NtCreateSectionEx", "NtCreateSemaphore", "NtCreateSymbolicLinkObject", "NtCreateThreadEx", "NtCreateTimer", "NtCreateTimer2", "NtCreateToken", "NtCreateTokenEx", "NtCreateTransaction", "NtCreateTransactionManager", "NtCreateUserProcess", "NtCreateWaitCompletionPacket", "NtCreateWaitablePort", "NtCreateWnfStateName", "NtCreateWorkerFactory", "NtDebugActiveProcess", "NtDebugContinue", "NtDeleteAtom", "NtDeleteBootEntry", "NtDeleteDriverEntry", "NtDeleteFile", "NtDeleteKey", "NtDeleteObjectAuditAlarm", "NtDeletePrivateNamespace", "NtDeleteValueKey", "NtDeleteWnfStateData", "NtDeleteWnfStateName", "NtDisableLastKnownGood", "NtDisplayString", "NtDrawText", "NtEnableLastKnownGood", "NtEnumerateBootEntries", "NtEnumerateDriverEntries", "NtEnumerateSystemEnvironmentValuesEx", "NtEnumerateTransactionObject", "NtExtendSection", "NtFilterBootOption", "NtFilterToken", "NtFilterTokenEx", "NtFlushBuffersFileEx", "NtFlushInstallUILanguage", "ArbPreprocessEntry", "NtFlushKey", "NtFlushProcessWriteBuffers", "NtFlushVirtualMemory", "NtFlushWriteBuffer", "NtFreeUserPhysicalPages", "NtFreezeRegistry", "NtFreezeTransactions", "NtGetCachedSigningLevel", "NtGetCompleteWnfStateSubscription", "NtGetContextThread", "NtGetCurrentProcessorNumber", "NtGetCurrentProcessorNumberEx", "NtGetDevicePowerState", "NtGetMUIRegistryInfo", "NtGetNextProcess", "NtGetNextThread", "NtGetNlsSectionPtr", "NtGetNotificationResourceManager", "NtGetWriteWatch", "NtImpersonateAnonymousToken", "NtImpersonateThread", "NtInitializeEnclave", "NtInitializeNlsFiles", "NtInitializeRegistry", "NtInitiatePowerAction", "NtIsSystemResumeAutomatic", "NtIsUILanguageComitted", "NtListenPort", "NtLoadDriver", "NtLoadEnclaveData", "NtLoadKey", "NtLoadKey2", "NtLoadKeyEx", "NtLockFile", "NtLockProductActivationKeys", "NtLockRegistryKey", "NtLockVirtualMemory", "NtMakePermanentObject", "NtMakeTemporaryObject", "NtManageHotPatch", "NtManagePartition", "NtMapCMFModule", "NtMapUserPhysicalPages", "NtMapViewOfSectionEx", "NtModifyBootEntry", "NtModifyDriverEntry", "NtNotifyChangeDirectoryFile", "NtNotifyChangeDirectoryFileEx", "NtNotifyChangeKey", "NtNotifyChangeMultipleKeys", "NtNotifyChangeSession", "NtOpenEnlistment", "NtOpenEventPair", "NtOpenIoCompletion", "NtOpenJobObject", "NtOpenKeyEx", "NtOpenKeyTransacted", "NtOpenKeyTransactedEx", "NtOpenKeyedEvent", "NtOpenMutant", "NtOpenObjectAuditAlarm", "NtOpenPartition", "NtOpenPrivateNamespace", "NtOpenProcessToken", "NtOpenRegistryTransaction", "NtOpenResourceManager", "NtOpenSemaphore", "NtOpenSession", "NtOpenSymbolicLinkObject", "NtOpenThread", "NtOpenTimer", "NtOpenTransaction", "NtOpenTransactionManager", "NtPlugPlayControl", "NtPrePrepareComplete", "NtPrePrepareEnlistment", "NtPrepareComplete", "NtPrepareEnlistment", "NtPrivilegeCheck", "NtPrivilegeObjectAuditAlarm", "NtPrivilegedServiceAuditAlarm", "NtPropagationComplete", "NtPropagationFailed", "NtPulseEvent", "NtQueryAuxiliaryCounterFrequency", "NtQueryBootEntryOrder", "NtQueryBootOptions", "NtQueryDebugFilterState", "NtQueryDirectoryFileEx", "NtQueryDirectoryObject", "NtQueryDriverEntryOrder", "NtQueryEaFile", "NtQueryFullAttributesFile", "NtQueryInformationAtom", "NtQueryInformationByName", "NtQueryInformationEnlistment", "NtQueryInformationJobObject", "NtQueryInformationPort", "NtQueryInformationResourceManager", "NtQueryInformationTransaction", "NtQueryInformationTransactionManager", "NtQueryInformationWorkerFactory", "NtQueryInstallUILanguage", "NtQueryIntervalProfile", "NtQueryIoCompletion", "NtQueryLicenseValue", "NtQueryMultipleValueKey", "NtQueryMutant", "NtQueryOpenSubKeys", "NtQueryOpenSubKeysEx", "CmpCleanUpHigherLayerKcbCachesPreCallback", "NtQueryQuotaInformationFile", "NtQuerySecurityAttributesToken", "NtQuerySecurityObject", "NtQuerySecurityPolicy", "NtQuerySemaphore", "NtQuerySymbolicLinkObject", "NtQuerySystemEnvironmentValue", "NtQuerySystemEnvironmentValueEx", "NtQuerySystemInformationEx", "NtQueryTimerResolution", "NtQueryWnfStateData", "NtQueryWnfStateNameInformation", "NtQueueApcThreadEx", "NtRaiseException", "NtRaiseHardError", "NtReadOnlyEnlistment", "NtRecoverEnlistment", "NtRecoverResourceManager", "NtRecoverTransactionManager", "NtRegisterProtocolAddressInformation", "NtRegisterThreadTerminatePort", "NtReleaseKeyedEvent", "NtReleaseWorkerFactoryWorker", "NtRemoveIoCompletionEx", "NtRemoveProcessDebug", "NtRenameKey", "NtRenameTransactionManager", "NtReplaceKey", "NtReplacePartitionUnit", "NtReplyWaitReplyPort", "NtRequestPort", "NtResetEvent", "NtResetWriteWatch", "NtRestoreKey", "NtResumeProcess", "NtRevertContainerImpersonation", "NtRollbackComplete", "NtRollbackEnlistment", "NtRollbackRegistryTransaction", "NtRollbackTransaction", "NtRollforwardTransactionManager", "NtSaveKey", "NtSaveKeyEx", "NtSaveMergedKeys", "NtSecureConnectPort", "NtSerializeBoot", "NtSetBootEntryOrder", "NtSetBootOptions", "NtSetCachedSigningLevel", "NtSetCachedSigningLevel2", "NtSetContextThread", "NtSetDebugFilterState", "NtSetDefaultHardErrorPort", "NtSetDefaultLocale", "NtSetDefaultUILanguage", "NtSetDriverEntryOrder", "NtSetEaFile", "NtSetHighEventPair", "NtSetHighWaitLowEventPair", "NtSetIRTimer", "NtSetInformationDebugObject", "NtSetInformationEnlistment", "NtSetInformationJobObject", "NtSetInformationKey", "NtSetInformationResourceManager", "NtSetInformationSymbolicLink", "NtSetInformationToken", "NtSetInformationTransaction", "NtSetInformationTransactionManager", "NtSetInformationVirtualMemory", "NtSetInformationWorkerFactory", "NtSetIntervalProfile", "NtSetIoCompletion", "NtSetIoCompletionEx", "BvgaSetVirtualFrameBuffer", "NtSetLowEventPair", "NtSetLowWaitHighEventPair", "NtSetQuotaInformationFile", "NtSetSecurityObject", "NtSetSystemEnvironmentValue", "NtSetSystemEnvironmentValueEx", "NtSetSystemInformation", "NtSetSystemPowerState", "NtSetSystemTime", "NtSetThreadExecutionState", "NtSetTimer2", "NtSetTimerEx", "NtSetTimerResolution", "NtSetUuidSeed", "NtSetVolumeInformationFile", "NtSetWnfProcessNotificationEvent", "NtShutdownSystem", "NtShutdownWorkerFactory", "NtSignalAndWaitForSingleObject", "NtSinglePhaseReject", "NtStartProfile", "NtStopProfile", "NtSubscribeWnfStateChange", "NtSuspendProcess", "NtSuspendThread", "NtSystemDebugControl", "NtTerminateEnclave", "NtTerminateJobObject", "NtTestAlert", "NtThawRegistry", "NtThawTransactions", "NtTraceControl", "NtTranslateFilePath", "NtUmsThreadYield", "NtUnloadDriver", "NtUnloadKey", "NtUnloadKey2", "NtUnloadKeyEx", "NtUnlockFile", "NtUnlockVirtualMemory", "NtUnmapViewOfSectionEx", "NtUnsubscribeWnfStateChange", "NtUpdateWnfStateData", "NtVdmControl", "NtWaitForAlertByThreadId", "NtWaitForDebugEvent", "NtWaitForKeyedEvent", "NtWaitForWorkViaWorkerFactory", "NtWaitHighEventPair", "NtWaitLowEventPair" };

	for (size_t lyshark = 0; lyshark < 464; lyshark++)
	{
		// 獲取起源地址
		ANSI_STRING ansi = { 0 };
		UNICODE_STRING uncode = { 0 };

		ULONGLONG ssdt_address = GetKeServiceDescriptorTable();
		// DbgPrint("SSDT基地址 = %p \n", ssdt_address);

		// 根據序號得到函式地址
		ULONGLONG address = GetSSDTFunctionAddress(lyshark);
		ULONG offset = GetOffsetAddress(address);

		RtlInitAnsiString(&ansi, SSDT[lyshark]);
		RtlAnsiStringToUnicodeString(&uncode, &ansi, TRUE);
		PULONGLONG source_address = MmGetSystemRoutineAddress(&uncode);
		DbgPrint("[LyShark] 序號 => [%d] | 當前地址 => %p | 起源地址 => %p | 相對地址 => %p | SSDT => %s \n", lyshark, address, source_address, offset, SSDT[lyshark]);
	}

	DriverObject->DriverUnload = UnDriver;
	return STATUS_SUCCESS;
}

我們運行這段程式，即可得到整個系統中所有的SSDT表地址資訊；

在WinDBG中可看到完整的輸出內容，當然有些函式沒有被匯出，起源地址是拿不到的，

文章作者：lyshark (王瑞)
文章出處：https://www.cnblogs.com/LyShark/p/16805999.html
著作權宣告：本博客文章與代碼均為學習時整理的筆記，文章 [均為原創] 作品，轉載請 [添加出處] ，您添加出處是我創作的動力！

轉載文章請遵守《中華人民共和國著作權法》相關法律規定或遵守《署名CC BY-ND 4.0國際》規范，合理合規攜帶原創出處轉載，如果不攜帶文章出處，并惡意轉載多篇原創文章被本人發現，本人保留起訴權！

轉載請註明出處，本文鏈接：https://www.uj5u.com/houduan/518458.html

標籤：C

上一篇：Kafka Client C --Producer && Consumer

下一篇：VSCode搭建C和C++環境

標籤雲
其他(157675) Python(38076) JavaScript(25376) Java(17977) C(15215) 區塊鏈(8255) C＃(7972) AI(7469) 爪哇(7425) MySQL(7132) html(6777) 基礎類(6313) sql(6102) 熊猫(6058) PHP(5869) 数组(5741) R(5409) Linux(5327) 反应(5209) 腳本語言(PerlPython)(5129) 非技術區(4971) Android(4554) 数据框(4311) css(4259) 节点.js(4032) C語言(3288) json(3245) 列表(3129) 扑(3119) C++語言(3117) 安卓(2998) 打字稿(2995) VBA(2789) Java相關(2746) 疑難問題(2699) 细绳(2522) 單片機工控(2479) iOS(2429) ASP.NET(2402) MongoDB(2323) 麻木的(2285) 正则表达式(2254) 字典(2211) 循环(2198) 迅速(2185) 擅长(2169) 镖(2155) 功能(1967) .NET技术(1958) Web開發(1951) python-3.x(1918) HtmlCss(1915) 弹簧靴(1913) C++(1909) xml(1889) PostgreSQL(1872) .NETCore(1853) 谷歌表格(1846) Unity3D(1843) for循环(1842)

熱門瀏覽
  • 【C++】Microsoft C++、C 和匯編程式檔案

    ......

    uj5u.com 2020-09-10 00:57:23 more
  • 例外宣告

    相比于斷言適用于排除邏輯上不可能存在的狀態，例外通常是用于邏輯上可能發生的錯誤。 例外宣告 Item 1：當函式不可能拋出例外或不能接受拋出例外時，使用noexcept 理由 如果不打算拋出例外的話，程式就會認為無法處理這種錯誤，并且應當盡早終止，如此可以有效地阻止例外的傳播與擴散。 示例 //不可 ......

    uj5u.com 2020-09-10 00:57:27 more
  • Codeforces 1400E Clear the Multiset(貪心 + 分治)

    鏈接：https://codeforces.com/problemset/problem/1400/E 來源：Codeforces 思路：給你一個陣列，現在你可以進行兩種操作，操作1：將一段沒有 0 的區間進行減一的操作，操作2：將 i 位置上的元素歸零。最終問：將這個陣列的全部元素歸零后操作的最少 ......

    uj5u.com 2020-09-10 00:57:30 more
  • UVA11610 【Reverse Prime】

    本人看到此題沒有翻譯，就附帶了一個自己的翻譯版本 思考 這一題，它的第一個要求是找出所有 $7$ 位反向質數及其質因數的個數。 我們應該需要質數篩篩選1~$10^{7}$的所有數，這里就不慢慢介紹了。但是，重讀題，我們突然發現反向質數都是 $7$ 位，而將它反過來后的數字卻是 $6$ 位數，這就說明 ......

    uj5u.com 2020-09-10 00:57:36 more
  • 統計區間素數數量

    1 #pragma GCC optimize(2) 2 #include <bits/stdc++.h> 3 using namespace std; 4 bool isprime[1000000010]; 5 vector<int> prime; 6 inline int getlist(int ......

    uj5u.com 2020-09-10 00:57:47 more
  • C/C++編程筆記：C++中的 const 變數詳解，教你正確認識const用法

    1、C中的const 1、區域const變數存放在堆疊區中，會分配記憶體（也就是說可以通過地址間接修改變數的值）。測驗代碼如下： 運行結果： 2、全域const變數存放在只讀資料段（不能通過地址修改，會發生寫入錯誤）， 默認為外部聯編，可以給其他源檔案使用（需要用extern關鍵字修飾） 運行結果： ......

    uj5u.com 2020-09-10 00:58:04 more
  • 【C++犯錯記錄】VS2019 MFC添加資源不懂如何修改資源宏ID

    1. 首先在資源視圖中，添加資源 2. 點擊新添加的資源，復制自動生成的ID 3. 在解決方案資源管理器中找到Resource.h檔案，編輯，使用整個專案搜索和替換的方式快速替換 宏宣告 4. Ctrl+Shift+F 全域搜索，點擊查找全部，然后逐個替換 5. 為什么使用搜索替換而不使用屬性視窗直 ......

    uj5u.com 2020-09-10 00:59:11 more
  • 【C++犯錯記錄】VS2019 MFC不懂的批量添加資源

    1. 打開資源頭檔案Resource.h，在其中預先定義好宏 ID（不清楚其實ID值應該設定多少，可以先新建一個相同的資源項，再在這個資源的ID值的基礎上遞增即可） 2. 在資源視圖中選中專案資源，按F7編輯資源檔案，按 ID 型別 相對路徑的形式添加 資源。（別忘了先把檔案拷貝到專案中的res檔案 ......

    uj5u.com 2020-09-10 01:00:19 more
  • C/C++編程筆記：關于C++的參考型別，專供新手入門使用

    今天要講的是C++中我最喜歡的一個用法——參考，也叫別名。 參考就是給一個變數名取一個變數名，方便我們間接地使用這個變數。我們可以給一個變數創建N個參考，這N + 1個變數共享了同一塊記憶體區域。(參考型別的變數會占用記憶體空間，占用的記憶體空間的大小和指標型別的大小是相同的。雖然參考是一個物件的別名，但 ......

    uj5u.com 2020-09-10 01:00:22 more
  • 【C/C++編程筆記】從頭開始學習C ++：初學者完整指南

    眾所周知，C ++的學習曲線陡峭，但是花時間學習這種語言將為您的職業帶來奇跡，并使您與其他開發人員區分開。您會更輕松地學習新語言，形成真正的解決問題的技能，并在編程的基礎上打下堅實的基礎。 C ++將幫助您養成良好的編程習慣（即清晰一致的編碼風格，在撰寫代碼時注釋代碼，并限制類內部的可見性），并且由 ......

    uj5u.com 2020-09-10 01:00:41 more
最新发布
  • Rust中的智能指標:Box<T> Rc<T> Arc<T> Cell<T> RefCell<T> Weak

    Rust中的智能指標是什么 智能指標（smart pointers）是一類資料結構，是擁有資料所有權和額外功能的指標。是指標的進一步發展 指標（pointer）是一個包含記憶體地址的變數的通用概念。這個地址參考，或 ” 指向”（points at）一些其 他資料 。參考以 & 符號為標志并借用了他們所 ......

    uj5u.com 2023-04-20 07:24:10 more
  • Java的值傳遞和參考傳遞

    值傳遞不會改變本身，參考傳遞（如果傳遞的值需要實體化到堆里）如果發生修改了會改變本身。 1.基本資料型別都是值傳遞 package com.example.basic; public class Test { public static void main(String[] args) { int ......

    uj5u.com 2023-04-20 07:24:04 more
  • [2]SpinalHDL教程——Scala簡單入門

    第一個 Scala 程式 shell里面輸入 $ scala scala> 1 + 1 res0: Int = 2 scala> println("Hello World!") Hello World! 檔案形式 object HelloWorld { /* 這是我的第一個 Scala 程式 * 以 ......

    uj5u.com 2023-04-20 07:23:58 more
  • 理解函式指標和回呼函式

    理解 函式指標 指向函式的指標。比如： 理解函式指標的偽代碼 void (*p)(int type, char *data); // 定義一個函式指標p void func(int type, char *data); // 宣告一個函式func p = func; // 將指標p指向函式func ......

    uj5u.com 2023-04-20 07:23:52 more
  • Django筆記二十五之資料庫函式之日期函式

    本文首發于公眾號：Hunter后端 原文鏈接：Django筆記二十五之資料庫函式之日期函式 日期函式主要介紹兩個大類，Extract() 和 Trunc() Extract() 函式作用是提取日期，比如我們可以提取一個日期欄位的年份，月份，日等資料 Trunc() 的作用則是截取，比如 2022-0 ......

    uj5u.com 2023-04-20 07:23:45 more
  • 一天吃透JVM面試八股文

    什么是JVM？ JVM，全稱Java Virtual Machine（Java虛擬機），是通過在實際的計算機上仿真模擬各種計算機功能來實作的。由一套位元組碼指令集、一組暫存器、一個堆疊、一個垃圾回收堆和一個存盤方法域等組成。JVM屏蔽了與作業系統平臺相關的資訊，使得Java程式只需要生成在Java虛擬機 ......

    uj5u.com 2023-04-20 07:23:31 more
  • 使用Java接入小程式訂閱訊息！

    更新完微信服務號的模板訊息之后，我又趕緊把微信小程式的訂閱訊息給實作了！之前我一直以為微信小程式也是要企業才能申請，沒想到小程式個人就能申請。 訊息推送平臺🔥推送下發【郵件】【短信】【微信服務號】【微信小程式】【企業微信】【釘釘】等訊息型別。 https://gitee.com/zhongfuch ......

    uj5u.com 2023-04-20 07:22:59 more
  • java -- 緩沖流、轉換流、序列化流

    緩沖流 緩沖流, 也叫高效流, 按照資料型別分類： 位元組緩沖流：BufferedInputStream，BufferedOutputStream 字符緩沖流：BufferedReader，BufferedWriter 緩沖流的基本原理，是在創建流物件時，會創建一個內置的默認大小的緩沖區陣列，通過緩沖 ......

    uj5u.com 2023-04-20 07:22:49 more
  • Java-SpringBoot-Range請求頭設定實作視頻分段傳輸

    老實說，人太懶了，現在基本都不喜歡寫筆記了，但是網上有關Range請求頭的文章都太水了 下面是抄的一段StackOverflow的代碼...自己大修改過的，寫的注釋挺全的，應該直接看得懂，就不解釋了 寫的不好...只是希望能給視頻網站開發的新手一點點幫助吧. 業務場景：視頻分段傳輸、視頻多段傳輸（理 ......

    uj5u.com 2023-04-20 07:22:42 more
  • Windows 10開發教程_編程入門自學教程_菜鳥教程-免費教程分享

    教程簡介 Windows 10開發入門教程 - 從簡單的步驟了解Windows 10開發，從基本到高級概念，包括簡介，UWP，第一個應用程式，商店，XAML控制元件，資料系結，XAML性能，自適應設計，自適應UI，自適應代碼，檔案管理，SQLite資料庫，應用程式到應用程式通信，應用程式本地化，應用程式 ......

    uj5u.com 2023-04-20 07:22:35 more

Copyright © 2010-2020 有解無憂