.NET 7 的 AOT 到底能不能扛反編譯？-有解無憂

一：背景

1.講故事

在B站，公眾號上發了一篇 AOT 的文章后，沒想到反響還是挺大的，都稱贊這個東西能抗反編譯，可以讓破解難度極大提高，可能有很多朋友對逆向不了解，以為用 ILSpy,Reflector,DnSpy 這些工具打不開就覺得很安全，其實不然，在 OllyDbg,IDA,WinDBG 這些逆向工具面前一樣是裸奔，

既然大家都很感興趣，那這篇就和大家聊一聊，

二：幾個例子

1. 動態修改程式資料

修改程式資料在逆向中再正常不過了，由于目前的 AOT 只能發布成 x64 ，這里就用 WinDbg 做下演示，首先看下例子，


    internal class Program
    {
        static void Main(string[] args)
        {
            while (true)
            {
                Console.WriteLine("hello world!");
                Thread.Sleep(1000);
            }
        }
    }

程式在不斷的輸出，接下來我們將 hello world 中的 world 給去掉，操作手法非常簡單，先記憶體搜索找到 hello world，然后修改 length=5 即可，


0:005> lm
start             end                 module name
00007ff7`95b70000 00007ff7`95e5d000   ConsoleApp1 C (private pdb symbols)  

0:005> s-u 00007ff7`95b70000 L?0x00007ff7`95e5d000 hello
00007ff7`95e1c41c  0068 0065 006c 006c 006f 0020 0077 006f  h.e.l.l.o. .w.o.

0:000> dp 00007ff795e1c41c-0x4 L1
00007ff7`95e1c418  00650068`0000000c

0:000> eq 00007ff7`95e1c418 00650068`00000005
0:000> g

2. 獲取程式托管堆

AOT 再怎么牛，它侄訓是個托管程式，既然是托管程式自然就有托管堆，托管堆中就有所有的托管資料，玩過 SOS.dll 朋友應該知道，用 !eeheap -gc 就能把托管堆給顯示出來，比如下面這樣，


0:022> !eeheap -gc
Number of GC Heaps: 1
generation 0 starts at 0x000002414D891030
generation 1 starts at 0x000002414D891018
generation 2 starts at 0x000002414D891000
ephemeral segment allocation context: none
         segment             begin         allocated         committed    allocated size    committed size
000002414D890000  000002414D891000  000002414D8D1FE8  000002414D8D2000  0x40fe8(266216)  0x41000(266240)
Large object heap starts at 0x000002415D891000
         segment             begin         allocated         committed    allocated size    committed size
000002415D890000  000002415D891000  000002415D891018  000002415D892000  0x18(24)  0x1000(4096)
Pinned object heap starts at 0x0000024165891000
0000024165890000  0000024165891000  0000024165899C10  00000241658A2000  0x8c10(35856)  0x11000(69632)
Total Allocated Size:              Size: 0x49c10 (302096) bytes.
Total Committed Size:              Size: 0x42000 (270336) bytes.
------------------------------
GC Allocated Heap Size:    Size: 0x49c10 (302096) bytes.
GC Committed Heap Size:    Size: 0x42000 (270336) bytes.

雖然目前的 AOT 不支持 SOS 擴展，無法顯示出托管堆，但一點關系都沒有，SOS 是通過 DataAccess 去挖的，大不來我手工挖一下就好了哈，接下來就是怎么挖的問題了，熟悉 CLR 的朋友應該知道所謂的托管堆在內部用的是 generation_table[] 一維資料來維護的，以 代 的方式來劃分，代的落地是用 heap_segment 來表示的，參考代碼如下：


generation gc_heap::generation_table [total_generation_count];

enum gc_generation_num
{
    // small object heap includes generations [0-2], which are "generations" in the general sense.
    soh_gen0 = 0,
    soh_gen1 = 1,
    soh_gen2 = 2,
    max_generation = soh_gen2,

    // large object heap, technically not a generation, but it is convenient to represent it as such
    loh_generation = 3,

    // pinned heap, a separate generation for the same reasons as loh
    poh_generation = 4,

    uoh_start_generation = loh_generation,

    // number of ephemeral generations
    ephemeral_generation_count = max_generation,

    // number of all generations
    total_generation_count = poh_generation + 1
};

接下來用 x 命令看下陣列內容，代碼如下：


0:000> x ConsoleApp1!WKS::gc_heap::generation_table
00007ff7`95e25010 ConsoleApp1!WKS::gc_heap::generation_table = class WKS::generation [5]

0:000> dx -r1 (*((ConsoleApp1!WKS::generation (*)[5])0x7ff795e25010))
(*((ConsoleApp1!WKS::generation (*)[5])0x7ff795e25010))                 [Type: WKS::generation [5]]
    [0]              [Type: WKS::generation]
    ...
    [4]              [Type: WKS::generation]

0:000> dx -r1 (*((ConsoleApp1!WKS::generation *)0x7ff795e25010))
(*((ConsoleApp1!WKS::generation *)0x7ff795e25010))                 [Type: WKS::generation]
    [+0x038] start_segment    : 0x25100000000 [Type: WKS::heap_segment *]
    [+0x040] allocation_start : 0x25100001030 : 0x38 [Type: unsigned char *]
    [+0x048] allocation_segment : 0x25100000000 [Type: WKS::heap_segment *]
    [+0x0d0] allocation_size  : 0x0 [Type: unsigned __int64]
    [+0x100] gen_num          : 0 [Type: int]
    ...

0:000> dx -r1 ((ConsoleApp1!WKS::heap_segment *)0x25100000000)
((ConsoleApp1!WKS::heap_segment *)0x25100000000)                 : 0x25100000000 [Type: WKS::heap_segment *]
    [+0x000] allocated        : 0x25100001048 : 0x90 [Type: unsigned char *]
    [+0x008] committed        : 0x25100012000 : Unable to read memory at Address 0x25100012000 [Type: unsigned char *]
    [+0x010] reserved         : 0x25110000000 : 0x18 [Type: unsigned char *]
    [+0x018] used             : 0x25100009fe0 : 0x0 [Type: unsigned char *]
    [+0x020] mem              : 0x25100001000 : 0x38 [Type: unsigned char *]
    [+0x028] flags            : 0x0 [Type: unsigned __int64]
    [+0x030] next             : 0x0 [Type: WKS::heap_segment *]
    ...

上面的這些欄位就描述出了 !eeheap -gc 的結果，接下來想挖什么，提取什么我就不過多介紹了，

3. 提取托管執行緒串列

提取 托管執行緒 串列也是非常重要的, 它能指示出很多資訊，一般用 !t 命令就能顯示，輸出如下：


0:022> !t
ThreadCount:      17
UnstartedThread:  0
BackgroundThread: 6
PendingThread:    0
DeadThread:       0
Hosted Runtime:   no
                                                                                                            Lock  
 DBG   ID     OSID ThreadOBJ           State GC Mode     GC Alloc Context                  Domain           Count Apt Exception
   0    1     4128 000002414BDB8C70    2a020 Preemptive  000002414D8C6108:000002414D8C8000 000002414bdaf8f0 -00001 MTA 
   6    2     4458 000002414BDE5EB0    2b220 Preemptive  0000000000000000:0000000000000000 000002414bdaf8f0 -00001 MTA (Finalizer) 
   7    4     23e8 000002416DDB15C0  102b220 Preemptive  000002414D8C9250:000002414D8CA000 000002414bdaf8f0 -00001 MTA (Threadpool Worker) 
   ...
  20   17     50a8 000002416DE43DD0  102b220 Preemptive  000002414D8BC2D0:000002414D8BDFD0 000002414bdaf8f0 -00001 MTA (Threadpool Worker) 
  21   18     57d4 000002416DE628E0  8029220 Preemptive  000002414D8CC2A8:000002414D8CE000 000002414bdaf8f0 -00001 MTA (Threadpool Completion Port)

既然目前的 SOS 不支持，同樣可以手工到 CLR 中去挖，熟悉的朋友應該知道 !t 的資料源來自于 ThreadStore::s_pThreadStore 下的 m_ThreadList 集合，它以鏈表的形式串聯了每個執行緒的 LinkPtr 欄位，但可惜的是，在 AOT 中，這一塊已經重寫了，由 g_pTheRuntimeInstance 全域變數下的 m_ThreadList 來維護了，

為了方便觀察，多生成幾個 Thread，


        static void Main(string[] args)
        {
            Debugger.Break();

            var tasks = Enumerable.Range(0, 10).Select(m => new Thread(() =>
            {
                Console.WriteLine($"tid={Thread.CurrentThread.ManagedThreadId} 已執行！");
                Console.ReadLine();
            }));

            foreach (var item in tasks)
            {
                item.Start();
            }

            Console.ReadLine();
        }

程式跑起來后，深挖 g_pTheRuntimeInstance 全域變數即可，


0:015> x ConsoleApp1!g_pTheRuntimeInstance
00007ff7`0155ee20 ConsoleApp1!g_pTheRuntimeInstance = 0x00000291`cb5b9300
0:015> dx -r1 ((ConsoleApp1!RuntimeInstance *)0x291cb5b9300)
((ConsoleApp1!RuntimeInstance *)0x291cb5b9300)                 : 0x291cb5b9300 [Type: RuntimeInstance *]
    [+0x000] m_pThreadStore   : 0x291cb5b9390 [Type: ThreadStore *]
    ...
0:015> dx -r1 ((ConsoleApp1!ThreadStore *)0x291cb5b9390)
((ConsoleApp1!ThreadStore *)0x291cb5b9390)                 : 0x291cb5b9390 [Type: ThreadStore *]
    [+0x000] m_ThreadList     [Type: SList<Thread,DefaultSListTraits<Thread,DoNothingFailFastPolicy> >]
    [+0x008] m_pRuntimeInstance : 0x291cb5b9300 [Type: RuntimeInstance *]
    [+0x010] m_Lock           [Type: ReaderWriterLock]
0:015> dx -r1 (*((ConsoleApp1!SList<Thread,DefaultSListTraits<Thread,DoNothingFailFastPolicy> > *)0x291cb5b9390))
(*((ConsoleApp1!SList<Thread,DefaultSListTraits<Thread,DoNothingFailFastPolicy> > *)0x291cb5b9390))                 [Type: SList<Thread,DefaultSListTraits<Thread,DoNothingFailFastPolicy> >]
    [+0x000] m_pHead          : 0x291ed366240 [Type: Thread *]
0:015> dx -r1 ((ConsoleApp1!Thread *)0x291ed366240)
((ConsoleApp1!Thread *)0x291ed366240)                 : 0x291ed366240 [Type: Thread *]
    ...
    [+0x058] m_pNext          : 0x291cb6aeb60 [Type: Thread *]
    [+0x060] m_hPalThread     : 0x204 [Type: void *]
    [+0x068] m_ppvHijackedReturnAddressLocation : 0x0 [Type: void * *]
    [+0x070] m_pvHijackedReturnAddress : 0x0 [Type: void *]
    [+0x078] m_uHijackedReturnValueFlags : 0x0 [Type: unsigned __int64]
    [+0x080] m_pExInfoStackHead : 0x0 [Type: ExInfo *]
    [+0x088] m_threadAbortException : 0x0 [Type: Object *]
    [+0x090] m_pThreadLocalModuleStatics : 0x291cb6aee90 [Type: void * *]
    [+0x098] m_numThreadLocalModuleStatics : 0x1 [Type: unsigned int]
    [+0x0a0] m_pGCFrameRegistrations : 0x0 [Type: GCFrameRegistration *]
    [+0x0a8] m_pStackLow      : 0xf754100000 [Type: void *]
    [+0x0b0] m_pStackHigh     : 0xf754200000 [Type: void *]
    [+0x0b8] m_pTEB           : 0xf7533ba000 : 0x0 [Type: unsigned char *]
    [+0x0c0] m_uPalThreadIdForLogging : 0x2044 [Type: unsigned __int64]
    [+0x0c8] m_threadId       [Type: EEThreadId]
    [+0x0d0] m_pThreadStressLog : 0x0 [Type: void *]
    [+0x0d8] m_interruptedContext : 0x0 [Type: _CONTEXT *]
    [+0x0e0] m_redirectionContextBuffer : 0x0 [Type: unsigned char *]
0:015> dx -r1 (*((ConsoleApp1!EEThreadId *)0x291ed366308))
(*((ConsoleApp1!EEThreadId *)0x291ed366308))                 [Type: EEThreadId]
    [+0x000] m_uiId           : 0x2044 [Type: unsigned __int64]

從CLR 的 Thread 維護的資訊來看，這個結構體已經很小了，也說明 AOT 在Thread資訊維護上做了很多的精簡，

三：總結

總的來說，AOT 確實能加速程式的初始啟動，一體化的打包機制也非常方便部署，但怎么變終究還是一個托管程式，需要底層的 C++ 托著它，扛反編譯無從談起，所以防小人的話，該加殼的加殼，該混淆的混淆，

轉載請註明出處，本文鏈接：https://www.uj5u.com/net/538092.html

標籤：.NET技术

上一篇：SQL Server（解決問題）已成功與服務器建立連接，但是在登錄程序中發生錯誤。provider：SSL Provider，error：0 - 證書鏈是由不受信任的頒發機構頒發的

下一篇：ASP.NET Core 簡介