[vlan102]port gi 3/0/2
Fail to add port(s) to VLAN!
哪位遇到過這問題
uj5u.com熱心網友回復：
dingdingdinguj5u.com熱心網友回復：
int g3/0/2
dis this
看下是什么
uj5u.com熱心網友回復：
[GigabitEthernet3/0/2]dis this#
interface GigabitEthernet3/0/2
#
return
uj5u.com熱心網友回復：
int g3/0/2
port link-type access
port def vlan 102
uj5u.com熱心網友回復：
出差了幾天。又試了下還不行[GigabitEthernet3/0/2]disp inter gi 3/0/2
GigabitEthernet3/0/2 current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is xxxx-xxxx-2616
The Maximum Transmit Unit is 9216
Media type is twisted pair, loopback not set
Port hardware type is 1000_BASE_T
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 0
Broadcast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 1
Mdi type: auto
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
[GigabitEthernet3/0/2]port access vlan 102
[GigabitEthernet3/0/2]
[GigabitEthernet3/0/2]disp vlan 102
VLAN ID: 102
VLAN Type: static
Route Interface: configured
IP Address: xxx.xxx.xxx.5
Subnet Mask: 255.255.255.0
Description: VLAN 0102
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports: none
轉載請註明出處，本文鏈接：https://www.uj5u.com/qita/103950.html
標籤：網絡維護與管理
上一篇：兩個局域網 不同的子網 如何互通
下一篇：會遠程桌面技術的看過來