一、操作目的

(1)簡單的數碼管應用，
(2)60進制操作練習，

二、代碼詳解（簡單應用）

#include <reg51.h>
#include <absacc.h>
#define uchar unsigned char
#define com8255 XBYTE[0xff23] //宏定義口地址
#define pa8255 XBYTE[0xff20]
#define pb8255 XBYTE[0xff21]
//unsigned char code mon51[3] _at_ 0x3b;//保留0X3B開始三個程式空間作全速中斷用
uchar code table[20] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E, 0xFF, 0x0C, 0x89, 0xDE};
uchar code wei[] = {0x20, 0x10, 0x08, 0x04, 0x02, 0x01};

void delay(unsigned int i)
{
   unsigned int j, k;
   for (k = 0; k < i; k++)
      for (j = 0; j < 100; j++)
         ;
}

void main(void)
{
   uchar m = 0;
   com8255 = 0x80; //控制口賦值
   pa8255 = 0x00;  //PA初始化
   pb8255 = 0x00;  //PB口初始化
   delay(2);

   while (1)
   {
      pb8255 = table[m];
      pa8255 = ~wei[m];
      delay(2);
      m++;
      if (m == 6)
      {
         m = 0;
      }
   }
}

三、代碼詳解（60進制）

#include <reg51.h>
#include <absacc.h>

#define uchar unsigned char
#define com8255 XBYTE[0xff23] //宏定義口地址
#define pa8255 XBYTE[0xff20]
#define pb8255 XBYTE[0xff21]
//unsigned char code mon51[3] _at_ 0x3b;//保留0X3B開始三個程式空間作全速中斷用
uchar code table[20] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E, 0xFF, 0x0C, 0x89, 0xDE}; //0x0C   p.
uchar code wei[] = {0x20, 0x10, 0x08, 0x04, 0x02, 0x01};
uchar code myTable[10] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90}; //0123456789

uchar code mywei[] = {0x02, 0x01};
void delay(unsigned int i)
{
	unsigned int j, k;
	for (k = 0; k < i; k++)
		for (j = 0; j < 100; j++)
			;
}

void main(void)
{
	uchar m = 0;
	uchar midM = 0;
	com8255 = 0x80; //控制口賦值
	pa8255 = 0x00;	//PA初始化
	pb8255 = 0x00;	//PB口初始化
	delay(2);

	while (1)
	{
		unsigned int j = 0;
		while (j < 150)
		{
			pb8255 = myTable[m % 10];
			pa8255 = ~wei[5];
			delay(2);
			pb8255 = myTable[m / 10];
			pa8255 = ~wei[4];
			delay(2);
			j++;
		}
		m++;
		if (m == 60)
		{
			m = 0;
		}
	}
}

轉載請註明出處，本文鏈接：https://www.uj5u.com/qita/277122.html

標籤：其他

上一篇：【國信長天藍橋杯】CT117E-M4 嵌入式開發板顯示屏播放Bad Apple，采用OLED_ToolBox

下一篇：ZYNQ 串口持續觸發 TX FIFO EMPTY中斷 XUARTPS_IXR_TXEMPTY