win10系統,連接 MDK 時,ST-link 出現 “ST link communication error” 錯誤,
用18年的 ST-link 時,在MDK下載程式時出現 “ST link communication error” 錯誤,意思是 ST-link 通訊錯誤,
網上查找是因為 ST-link 韌體版本太低,于是用MDK里面的韌體升級工具來升級,發現連接時出現 “the content of stlink is corrupt” 錯誤,依舊無法升級,

于是到ST官網去下載一個新的升級工具,網址:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-link007.html


工具版本號選擇了2.33.25,下載解壓后,打開檔案夾,stsw-link007-----Windows-------升級工具


打開后,連接 ST-link,序列號出現,點擊 yes 按鈕,升級后的圖,

再連接MDK,下載正常,
以上為個人遇到問題的解決案例,不一定適合所以朋友,愿遇到相同問題的小伙伴可以成功解決,
轉載請註明出處,本文鏈接:https://www.uj5u.com/qita/287455.html
標籤:其他
上一篇:為什么有人勸別選計算機專業?
