查看.tr檔案和.nam發檔案下所有的節點的x，y值都是（0，0），nam影像更沒有運行出來
于是我將
if { $opt(sc) == "" } {
puts "*** NOTE: no scenario file specified."
set opt(sc) "none"
} else {
puts "Loading scenario file..."
source $opt(sc)
puts "Load complete..."
}
幾行代碼移動到：initial_node_pos呼叫方法之前，解決了節點位置為0的問題，但是nam仿真時又出現了沒有資料的問題，且一按開始影片時間進度條就會變成空白，又是一個問題，這又是為什么呢？
仔細對比wireless.tcl 檔案發現是由于仿真結束后將兩行代碼注釋掉了：
proc stop {} {
global ns_ nam_vystup
$ns_ flush-trace
close $nam_vystup
#exec nam out_aodv_big_auto.nam &
#exit 0
}
這兩行代碼注釋了導致nam沒有資料收發，具體原因我也不知道為什么，只是淺薄的知道時這兩行代碼有問題
將這兩行代碼的注釋去掉后，nam影片正常了
以下是我的wireless.tcl代碼：
set opt(chan) Channel/WirelessChannel
set opt(prop) Propagation/TwoRayGround
#set opt(netif) NetIf/SharedMedia
set opt(netif) Phy/WirelessPhy
#set opt(mac) Mac/802_11
set opt(mac) Mac/802_11
set opt(ifq) Queue/DropTail/PriQueue
set opt(ll) LL
set opt(ant) Antenna/OmniAntenna
set opt(x) 670 ;# X dimension of the topography
set opt(y) 670 ;# Y dimension of the topography
#set opt(cp) "../mobility/scene/cbr-50-20-4-512" ;# connection pattern file
set opt(cp) ""
set opt(sc) "../mobility/scene/scen-670x670-50-600-20-2" ;# scenario file
set opt(ifqlen) 50 ;# max packet in ifq
set opt(nn) 101 ;# number of nodes
set opt(seed) 0.0
set opt(stop) 50.0 ;# simulation time
set opt(tr) out.tr ;# trace file
set opt(rp) dsdv ;# routing protocol script
set opt(lm) "on" ;# log movement
# ======================================================================
set AgentTrace ON
set RouterTrace ON
set MacTrace OFF
LL set mindelay_ 50us
LL set delay_ 25us
LL set bandwidth_ 0 ;# not used
LL set off_prune_ 0 ;# not used
LL set off_CtrMcast_ 0 ;# not used
Agent/Null set sport_ 0
Agent/Null set dport_ 0
Agent/CBR set sport_ 0
Agent/CBR set dport_ 0
Agent/TCPSink set sport_ 0
Agent/TCPSink set dport_ 0
Agent/TCP set sport_ 0
Agent/TCP set dport_ 0
Agent/TCP set packetSize_ 1460
Queue/DropTail/PriQueue set Prefer_Routing_Protocols 1
# unity gain, omni-directional antennas
# set up the antennas to be centered in the node and 1.5 meters above it
Antenna/OmniAntenna set X_ 0
Antenna/OmniAntenna set Y_ 0
Antenna/OmniAntenna set Z_ 1.5
Antenna/OmniAntenna set Gt_ 1.0
Antenna/OmniAntenna set Gr_ 1.0
# Initialize the SharedMedia interface with parameters to make
# it work like the 914MHz Lucent WaveLAN DSSS radio interface
Phy/WirelessPhy set CPThresh_ 10.0
Phy/WirelessPhy set CSThresh_ 1.559e-11
Phy/WirelessPhy set RXThresh_ 3.652e-10
Phy/WirelessPhy set Rb_ 2*1e6
Phy/WirelessPhy set Pt_ 0.2818
Phy/WirelessPhy set freq_ 914e+6
Phy/WirelessPhy set L_ 1.0
# ======================================================================
proc usage { argv0 } {
puts "Usage: $argv0"
puts "\tmandatory arguments:"
puts "\t\t\[-x MAXX\] \[-y MAXY\]"
puts "\toptional arguments:"
puts "\t\t\[-cp conn pattern\] \[-sc scenario\] \[-nn nodes\]"
puts "\t\t\[-seed seed\] \[-stop sec\] \[-tr tracefile\]\n"
}
proc getopt {argc argv} {
global opt
lappend optlist cp nn seed sc stop tr x y
for {set i 0} {$i < $argc} {incr i} {
set arg [lindex $argv $i]
if {[string range $arg 0 0] != "-"} continue
set name [string range $arg 1 end]
set opt($name) [lindex $argv [expr $i+1]]
}
}
proc cmu-trace { ttype atype node } {
global ns_ tracefd
if { $tracefd == "" } {
return ""
}
set T [new CMUTrace/$ttype $atype]
$T target [$ns_ set nullAgent_]
$T attach $tracefd
$T set src_ [$node id]
$T node $node
return $T
}
proc create-god { nodes } {
global ns_ god_ tracefd
set god_ [new God]
$god_ num_nodes $nodes
}
proc log-movement {} {
global logtimer ns_ ns
set ns $ns_
source tcl/mobility/timer.tcl
Class LogTimer -superclass Timer
LogTimer instproc timeout {} {
global opt node_;
for {set i 0} {$i < $opt(nn)} {incr i} {
$node_($i) log-movement
}
$self sched 0.1
}
set logtimer [new LogTimer]
$logtimer sched 0.1
}
# ======================================================================
# Main Program
# ======================================================================
getopt $argc $argv
#
# Source External TCL Scripts
#
source tcl/lib/ns-mobilenode.tcl
#if { $opt(rp) != "" } {
source tcl/mobility/$opt(rp).tcl
#} elseif { [catch { set env(NS_PROTO_SCRIPT) } ] == 1 } {
#puts "\nenvironment variable NS_PROTO_SCRIPT not set!\n"
#exit
#} else {
#puts "\n*** using script $env(NS_PROTO_SCRIPT)\n\n";
#source $env(NS_PROTO_SCRIPT)
#}
source tcl/lib/ns-cmutrace.tcl
# do the get opt again incase the routing protocol file added some more
# options to look for
getopt $argc $argv
if { $opt(x) == 0 || $opt(y) == 0 } {
usage $argv0
exit 1
}
if {$opt(seed) > 0} {
puts "Seeding Random number generator with $opt(seed)\n"
ns-random $opt(seed)
}
#
# Initialize Global Variables
#
set ns_ [new Simulator]
set chan [new $opt(chan)]
set prop [new $opt(prop)]
set topo [new Topography]
# setup output trace file
#set tracefd [open $opt(rp).tr w]
#set tracefd [open leach.tr w]
set tracefd [open $opt(tr) w]
# try for setup output nam file
set nam_vystup [open $opt(rp).nam w]
$ns_ trace-all $tracefd
$ns_ namtrace-all-wireless $nam_vystup $opt(x) $opt(y)
# end
$topo load_flatgrid $opt(x) $opt(y)
$prop topography $topo
#
# Create God
#
create-god $opt(nn)
$ns_ node-config -adhocRouting $opt(rp) \
-llType $opt(ll) \
-macType $opt(mac) \
-ifqType $opt(ifq) \
-ifqLen $opt(ifqlen) \
-antType $opt(ant) \
-propType $opt(prop) \
-phyType $opt(netif) \
-channel $opt(chan) \
-topoInstance $topo \
-agentTrace ON \
-routerTrace ON \
-macTrace ON \
-wiredRouting OFF
#
# log the mobile nodes movements if desired
#
if { $opt(lm) == "on" } {
log-movement
}
#
# Create the specified number of nodes $opt(nn) and "attach" them
# the channel.
# Each routing protocol script is expected to have defined a proc
# create-mobile-node that builds a mobile node and inserts it into the
# array global $node_($i)
#
if { [string compare $opt(rp) "dsr"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
dsr-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "dsdv"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
dsdv-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "leach"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
leach-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "leach-c"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
leach-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "stat-clus"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
leach-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "mte"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
leach-create-mobile-node $i
}
} elseif { [string compare $opt(rp) "pegasis"] == 0} {
for {set i 0} {$i < $opt(nn) } {incr i} {
leach-create-mobile-node $i
}
}
#
# Source the Connection and Movement scripts
#
if { $opt(cp) == "" } {
puts "*** NOTE: no connection pattern specified. - wireless.tcl"
set opt(cp) "none"
} else {
puts "Loading connection pattern...- wireless.tcl"
source $opt(cp)
}
#
# Tell all the nodes when the simulation ends
#
for {set i 0} {$i < $opt(nn) } {incr i} {
$ns_ at $opt(stop).000000001 "$node_($i) reset";
}
# original end $ns_ at $opt(stop).00000001 "puts \"NS EXITING...\" ; $ns_ halt"
# new end
$ns_ at $opt(stop).0001 "stop"
$ns_ at $opt(stop).000000002 "puts \"NS EXITING...\" ; $ns_ halt"
# Change for stop
proc stop {} {
global ns_ nam_vystup
$ns_ flush-trace
close $nam_vystup
exec nam out_aodv_big_auto.nam &
exit 0
}
# end of change
if { $opt(sc) == "" } {
puts "*** NOTE: no scenario file specified. - wireless.tcl"
set opt(sc) "none"
} else {
puts "Loading scenario file... - wireless.tcl"
source $opt(sc)
puts "Load complete... - wireless.tcl"
}
for {set i 0} {$i < $opt(nn)} {incr i} {
$ns_ initial_node_pos $node_($i) 6
}
puts $tracefd "M 0.0 nn $opt(nn) x $opt(x) y $opt(y) rp $opt(rp)"
puts $tracefd "M 0.0 sc $opt(sc) cp $opt(cp) seed $opt(seed)"
puts $tracefd "M 0.0 prop $opt(prop) ant $opt(ant)"
puts "Starting Simulation... - wireless.tcl"
$ns_ run
轉載請註明出處，本文鏈接：https://www.uj5u.com/qita/470627.html
標籤：其他
上一篇：柔性引數化彈簧建立