把控制板連接到電腦后，在CCS的Target Configuration中設定好connection和board or device后，點擊test connection，彈出的視窗顯示
......
Scan tests: 2, skipped: 0, failed: 1
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 2
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 3
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 4
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 5
Some of the values were corrupted - 83.3 percent.
The JTAG DR Integrity scan-test has failed.
[End: Texas Instruments XDS100v2 USB Debug Probe_0]
即沒有成功連接到目標板！
有人知道這是什么情況嗎。怎么解決，急需解答，謝謝！
轉載請註明出處，本文鏈接：https://www.uj5u.com/qita/69047.html
標籤：其他硬件開發
上一篇：求段匯編代碼