本人學過郭天祥的51單片機，現在要學習STM32。我在一個公司上班，我們公司做光通信設備的，各種低速，高速業務通過光纖傳輸。設備有以太網業務，100M，1000M以太網都有，設備也有網管軟體，也是以太網介面的。現在我必須學會以太網，我應該買哪塊板子？好像F407和F103戰艦V3有以太網RJ45介面，這2塊板子上面有以太網芯片嗎？他們2個 以太網有啥區別？我到底應該買哪塊？這兩款板子學起來難易程度如何？謝謝大神給點意見
uj5u.com熱心網友回復：
你直接試試咨詢他們的技術支持uj5u.com熱心網友回復：
F1比F4上手更快一點uj5u.com熱心網友回復：
好的。我再比較下uj5u.com熱心網友回復：
建議購買STM32F103系列的，上手快些。STM32F103系列只是比STM32F407系列運算速度慢，資源少點（例如STM32F407支持6個串口，但是STM32F103只支持5個口串口），
STM32F103系列晶振為72M，STM32F407系列晶振為168M.
STM32F407還支持硬體浮點數，所以計算浮點數時會大幅提高速度，其它沒有什么區別。
1、下面是STM32F103VC的系統的硬體資源
ARM 32-bit Cortex-M3 Microcontroller, 72MHz, 256kB Flash, 48kB SRAM,
Flexible Static Memory Controller for SRAM, PSRAM, NOR and NAND Flash,
PLL, Embedded Internal RC 8MHz and 32kHz, Real-Time Clock,
Nested Interrupt Controller, Power Saving Modes, JTAG and SWD,
4 Synch. 16-bit Timers with Input Capture, Output Compare and PWM,
2 16-bit Advanced Timer, 2 16-bit Basic Timer, 2 16-bit Watchdog Timers,
SysTick Timer, 3 SPI/I2S, 2 I2C, 5 USART, USB 2.0 Full Speed Interface,
CAN 2.0B Active, 3 12-bit 16-ch A/D Converter, 2 12-bit D/A Converter,
SDIO, Fast I/O Ports
2、下面是STM32F407IG的系統的硬體資源
Core
- ARM 32-bit Cortex-M4 CPU with FPU
- Adaptive real-time accelerator (ART Accelerator)
- 168 MHz maximum frequency, 210 DMIPS/1.25 DMIPS/MHz
- Memory protection unit
Memories
- Up to 1 Mbyte of Flash memory
- Up to 192+4 Kbytes of SRAM
- Flexible static memory controller
(supports Compact Flash, SRAM, PSRAM, NOR, NAND memories)
LCD parallel interface, 8080/6800 modes
Clock, reset and supply management
- 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4 to 25 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
Low power
- Sleep, Stop, Standby modes
- VBAT supply for RTC,
20x32 bit backup registers + optional 4 KB backup SRAM
3 x 12-bit, 0.41 us A/D converters
- up to 24 channels
2 x 12-bit D/A converters
General-purpose DMA
- 16-stream DMA controller with centralized FIFOs and burst support
Up to 17 timers
- up to 12 16-bit and 2 32-bit timers up to 150 MHz
Debug mode
- Serial wire debug (SWD) & JTAG
- Cortex-M4 Embedded Trace Macrocell
Up to 140 I/O ports with interrupt capability
- Up to 136 fast I/Os up to 60 MHz
- Up to 138 5 V-tolerant I/Os
Up to 15 communication interfaces
- Up to 3 x I2C interfaces
- Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816, LIN, IrDA, modem control)
- Up to 3 SPIs (37.5 Mbits/s)
- 2 x CAN interfaces (2.0B Active)
- SDIO interface
Advanced connectivity
- USB 2.0 FS device/host/OTG controller with on-chip PHY
- USB 2.0 HS/FS device/host/OTG controller with dedicated DMA,
on-chip FS PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA
8 to 14-bit parallel camera interface up to 67.2 Mbytes/s
Cryptographic acceleration
- Hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1)
Analog true random number generator
CRC calculation unit, 96-bit unique ID
RTC: subsecond accuracy, hardware calendar
uj5u.com熱心網友回復：
F103戰艦板uj5u.com熱心網友回復：
首先要資源多，其次是跟上發展潮流，當然是哪個快選哪個啦
（雖說現在大多公司用的還是103多）
uj5u.com熱心網友回復：
置頂置頂，現在準備買407了，誰有舊的賣一塊給我uj5u.com熱心網友回復：
F103沒有網路功能，起碼也要F107（F105部分有 網路功能）uj5u.com熱心網友回復：
好的，必須買帶7的吧，那就直接407
轉載請註明出處，本文鏈接：https://www.uj5u.com/qita/92847.html
標籤：單片機/工控
上一篇：hzk16取不到對應的字