OSS_SDK在海思平臺上的移植-有解無憂

阿里云OSS簡介

阿里云物件存盤OSS（Object Storage Service）是阿里云提供的海量、安全、低成本、高持久的云存盤服務，

阿里云OSS官方地址
c_sdk:
https://github.com/aliyun/aliyun-oss-c-sdk
cpp_sdk:
https://github.com/aliyun/aliyun-oss-cpp-sdk
相關依賴庫：
Libcurl
Apr
apr-util
minixml
openssl
我自己整理打包了一個，可以直接下載
https://download.csdn.net/download/weixin_43817380/13077093

1 mxmlv2.10

下載地址：
https://github.com/michaelrsweet/mxml/releases
建立cross.sh檔案，把下面的復制進去，修改相關目錄執行，然后make，make install即可安裝至–prefix指定的目錄，

–prefix：安裝目錄即make install之后 include lib 位置所在目錄，（后面相同就不說了）
–host：該軟體將要運行的平臺（可隨意設定）
CC：交叉編譯的gcc工具
CXX：交叉編譯的g++工具

./configure                           \
--prefix=/home/dl/OSS/libmxml          \
-host=arm-linux                        \
CC=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-gcc   \
CXX=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-g++

執行sh cross.sh命令，配置成功后
然后執行make，make install，

2 libcurl 庫

原始碼：https://curl.haxx.se/download.html

./configure \
--prefix=/home/dl/OSS/libcurl \
--host=arm-linux \
CC=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-gcc   \
CXX=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-g++

執行sh cross.sh命令，配置成功后
然后執行make，make install，

3 apr-1.7.0

下載地址 https://apr.apache.org/

./configure --prefix=/home/dl/OSS/libapr \
--host=arm-linux CC=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-gcc \
CXX=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-g++ \
ac_cv_file__dev_zero=yes ac_cv_func_setpgrp_void=yes \
apr_cv_process_shared_works=yes apr_cv_mutex_robust_shared=yes \
apr_cv_tcp_nodelay_with_cork=yes \
ap_void_ptr_lt_long=no \
APR_HAS_PROC_PTHREAD_SERIALIZE=yes

執行sh cross.sh，make，make install即可
運行后執行make，會出錯

3.1 報錯./include/apr_want.h:94:8: error: redefinition of ‘struct iovec’

修改apr_want.h檔案，從92行開始

#ifndef APR_IOVEC_DEFINED
#define APR_IOVEC_DEFINED
  struct iovec
 {
 void *iov_base;
  size_t iov_len;
  };  
  #endif /* !APR_IOVEC_DEFINED */

把這一段注釋掉

3.2 報錯encoding/apr_escape.c:79:33: error: ‘test_char_table’ undeclared

在makeflie里第134行找到

OBJECTS_gen_test_char = tools/gen_test_char.lo $(LOCAL_LIBS)

把它屏蔽掉

或者在./encoding/apr_escape.c 檔案中把

 #define TEST_CHAR(c, f)        (test_char_table[(unsigned)(c)] & (f))

定義改為空

3.3報錯locks/unix/proc_mutex.c:1494:28: error: ‘mutex_proc_pthread_methods’ undeclared (first use in this function)

去apr.h檔案中把255行的

#define APR_HAS_PROC_PTHREAD_SERIALIZE    0

改為

#define APR_HAS_PROC_PTHREAD_SERIALIZE    1

保存，然后make，make install

4 apr-util-1.5.4

下載地址同 apr ： https://apr.apache.org/
在編譯前需要先編譯libexpat

4.1libexpat的交叉編譯

下載地址 https://github.com/libexpat/libexpat
進入libexpat-master/expat目錄，創建cross.sh檔案

./configure --prefix=/home/dl/OSS/libexpat   \
-host=arm-linux \
CC=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-gcc

執行sh cross.sh，make，make install即可

4.2 apr-util 1.5.4的交叉編譯

建立cross.sh 檔案

./configure \
CC=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-gcc \
CXX=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-g++ --host=arm-linux  \
--prefix=/home/dl/OSS/libaprutil \
--with-apr=/home/dl/OSS/libapr \
--with-expat=/home/dl/OSS/libexpat

其中 --with-apr是之前編譯apr后的安裝目錄
–with-expatr是之前編譯expat后的安裝目錄
make，make install即可

5 openssl 1.1.1c 的交叉編譯

下載地址 https://www.openssl.org/source/
建立cross.sh檔案，加入以下內容

./config no-asm shared no-async \
--prefix=/home/dl/OSS/libssl \
--cross-compile-prefix=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin/arm-himix200-linux-

配置好sudo make，會提示錯誤

5.1 錯誤提示arm-himix200-linux-gcc: error: unrecognized command line option ‘-m64’

打開Makefile檔案，搜索-m64，在124行找到

CNF_CPPFLAGS=-DNDEBUG
CNF_CFLAGS=-pthread -m64
CNF_CXXFLAGS=-std=c++11 -pthread -m64
CNF_LDFLAGS=
CNF_EX_LIBS=-ldl -pthread

把-m64選項洗掉掉，sudo make ,sudo make install即可

6 aliyun-oss-cpp-sdk的交叉編譯

建立cross.sh檔案，加入腳本

cmake . -DCMAKE_INSTALL_PREFIX=/home/dl/OSS/OSS_sdk \
-DCURL_INCLUDE_DIR=/home/dl/OSS/libcurl/include/  \
-DCURL_LIBRARY=/home/dl/OSS/libcurl/lib/libcurl.a  \
-DAPR_INCLUDE_DIR=/home/dl/OSS/libapr/include/apr-1/  \
-DAPR_LIBRARY=/home/dl/OSS/libapr/lib/libapr-1.a   \
-DAPR_UTIL_INCLUDE_DIR=/home/dl/OSS/libaprutil/include/apr-1   \
-DAPR_UTIL_LIBRARY=/home/dl/OSS/libaprutil/lib/libaprutil-1.a \
-DMINIXML_INCLUDE_DIR=/root/libmxml/include/  \
-DMINIXML_LIBRARY=/home/dl/OSS/libmxml/lib/libmxml.a  \
-DOPENSSL_INCLUDE_DIR=/home/dl/OSS/libssl/include  \
-DOPENSSL_LIBRARY=/home/dl/OSS/libssl/lib

-DCMAKE_INSTALL_PREFIX是OSS安裝的路徑，下面這些分別是之前所編譯的庫的路徑（openssl除外），openssl要進入CMakeLists.txt后修改
打開CMakeLists.txt，在檔案最前面加入

SET(CMAKE_SYSTEM_NAME Linux)
#這一句一定要放在最前面
cmake_minimum_required(VERSION 3.1)
#########

SET(TOOLCHAIN_DIR "/opt/hisi-linux/x86-arm/arm-himix200-linux")
SET(CMAKE_SYSTEM_PROCESSOR MIPS)
SET(CMAKE_FIND_ROOT_PATH ${TOOLCHAIN_DIR})
SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
SET(CMAKE_C_COMPILER ${TOOLCHAIN_DIR}/host_bin/arm-linux-gnueabi-gcc)
SET(CMAKE_CXX_COMPILER ${TOOLCHAIN_DIR}/host_bin/arm-linux-gnueabi-g++)

#下面這些注意修改對應的路徑
FIND_PROGRAM(APR_CONFIG_BIN NAMES apr-config apr-1-config PATHS /home/dl/OSS/libapr/bin /usr/bin /usr/local/bin /usr/local/apr/bin/)
FIND_PROGRAM(APU_CONFIG_BIN NAMES apu-config apu-1-config PATHS /home/dl/OSS/libaprutil/bin /usr/bin /usr/local/bin /usr/local/apr/bin/)
#接著向下走 #curl-config時添加
FIND_PROGRAM(CURL_CONFIG_BIN NAMES curl-config PATH /home/dl/OSS/libcurl/bin )

此時還沒有鏈接到openssl庫，
接著向下找到include(FindOpenSSL)和`

	if(NOT OPENSSL_FOUND)
		message(FATAL_ERROR "Could not find openssl")
	endif()

部分，注釋掉，加入

	include_directories(/home/dl/OSS/libssl/include)
	FIND_LIBRARY(OPENSSL_LIB  /home/dl/OSS/libssl/lib NO_DEFAULT_PATH)

然后還需要向下拉到最后，找到

if(BUILD_SAMPLE)
	add_subdirectory(sample)
endif()

if(BUILD_TESTS)
	add_subdirectory(test)
	add_subdirectory(ptest)
endif()

全都注釋掉
保存修改并 sudo sh cross.sh
然后sudo make，sudo make install 即可

最后附上我修改后的CMakeList.txt

#
# Copyright 2009-2017 Alibaba Cloud All rights reserved.
# 
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# 
#      http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
SET(CMAKE_SYSTEM_NAME Linux)
cmake_minimum_required(VERSION 3.1)


#########
SET(CMAKE_SYSTEM_NAME Linux)
SET(TOOLCHAIN_DIR "/opt/hisi-linux/x86-arm/arm-himix200-linux")
SET(CMAKE_SYSTEM_PROCESSOR MIPS)
SET(CMAKE_FIND_ROOT_PATH ${TOOLCHAIN_DIR})
SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
SET(CMAKE_C_COMPILER ${TOOLCHAIN_DIR}/host_bin/arm-linux-gnueabi-gcc)
SET(CMAKE_CXX_COMPILER ${TOOLCHAIN_DIR}/host_bin/arm-linux-gnueabi-g++)
#SET(CMAKE_C_COMPILER ${TOOLCHAIN_DIR}/bin/aarch64-linux-gnu-gcc)
#SET(CMAKE_CXX_COMPILER ${TOOLCHAIN_DIR}/bin/aarch64-linux-gnu-g++)

FIND_PROGRAM(APR_CONFIG_BIN NAMES apr-config apr-1-config PATHS /home/dl/OSS/libapr/bin /usr/bin /usr/local/bin /usr/local/apr/bin/)
FIND_PROGRAM(APU_CONFIG_BIN NAMES apu-config apu-1-config PATHS /home/dl/OSS/libaprutil/bin /usr/bin /usr/local/bin /usr/local/apr/bin/)
#接著向下走 #curl-config時添加
FIND_PROGRAM(CURL_CONFIG_BIN NAMES curl-config PATH /home/dl/OSS/libcurl/bin )

cmake_policy(SET CMP0048 NEW)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)

#Project setting
file(STRINGS "VERSION" version)
project(alibabacloud-oss-cpp-sdk VERSION ${version})
message(STATUS "Project version: ${PROJECT_VERSION}")
set(SDK_ROOT "${CMAKE_CURRENT_SOURCE_DIR}")
set(TARGET_OUTPUT_NAME_PREFIX "alibabacloud-oss-" CACHE STRING "The target's output name prefix")

######


#Options
option(BUILD_SHARED_LIBS  "Enable shared library" OFF)
#option(BUILD_SAMPLE "Build sample" ON)
#如果不想編譯例程和測驗的檔案，也可以在這里設定為OFF
option(BUILD_SAMPLE "Build sample" OFF)

option(BUILD_TESTS "Build unit and perfermence tests" OFF)
option(ENABLE_COVERAGE "Flag to enable/disable building code with -fprofile-arcs and -ftest-coverage. Gcc only" OFF)
option(ENABLE_RTTI "Flag to enable/disable building code with RTTI information" ON)
#############################
#如果提示Do not support target platform就把這一段全都注釋掉
############################
#Platform
# if (CMAKE_CROSSCOMPILING)
# 	if (${CMAKE_SYSTEM_NAME} STREQUAL "Android")
# 		set(PLATFORM_ANDROID 1)
# 		set(TARGET_OS "ANDROID")
# 	else()
# 		message(FATAL_ERROR "Do not support target platform")
# 	endif()
# else()
# 	if(CMAKE_HOST_APPLE)
# 		set(PLATFORM_APPLE 1)
# 		set(TARGET_OS "APPLE")
# 	elseif(CMAKE_HOST_UNIX)
# 		set(PLATFORM_LINUX 1)
# 		set(TARGET_OS "LINUX")
# 	elseif(CMAKE_HOST_WIN32)
# 		set(PLATFORM_WINDOWS 1)
# 		set(TARGET_OS "WINDOWS")
# 	else()
# 		message(FATAL_ERROR "Do not support unknown host OS")
# 	endif()
# endif()

# set(PLATFORM_LINUX 1)
# set(TARGET_OS "LINUX")

message(STATUS "TARGET_OS: ${TARGET_OS}")

add_definitions(-DPLATFORM_${TARGET_OS})

#######################
#如果一直提示不正確的if引數，就仿照我這樣注釋掉他們
#######################
#Find dependency Library, curl, openssl
# if (${TARGET_OS} STREQUAL "WINDOWS")
# 	set(WLIB_TARGET "Win32")
# 	if (CMAKE_CL_64)
# 	set(WLIB_TARGET "x64")
# 	endif()
# 	set(CRYPTO_LIBS 
# 		${CMAKE_SOURCE_DIR}/third_party/lib/${WLIB_TARGET}/ssleay32.lib)
# 		${CMAKE_SOURCE_DIR}/third_party/lib/${WLIB_TARGET}/libeay32.lib)
# 	set(CRYPTO_INCLUDE_DIRS 
# 		${CMAKE_SOURCE_DIR}/third_party/include) 

# 	set(CLIENT_LIBS 
# 		${CMAKE_SOURCE_DIR}/third_party/lib/${WLIB_TARGET}/libcurl.lib) 
# 	set(CLIENT_INCLUDE_DIRS 
# 		${CMAKE_SOURCE_DIR}/third_party/include) 
# else()
	#include(FindCURL)
	#include(FindOpenSSL)
 
	#if(NOT CURL_FOUND)
	#	message(FATAL_ERROR "Could not find curl")
	#endif()
	######################
	#很奇怪我一直提示找不到CURL的庫，只好這么加入了CURL的路徑和庫
	include_directories(/home/dl/OSS/libcurl/include)
	FIND_LIBRARY(CURL_LIB  /home/dl/OSS/libcurl/lib NO_DEFAULT_PATH)
	include_directories(/home/dl/OSS/libssl/include)
	FIND_LIBRARY(OPENSSL_LIB  /home/dl/OSS/libssl/lib NO_DEFAULT_PATH)
	######################
	# if(NOT OPENSSL_FOUND)
	# 	message(FATAL_ERROR "Could not find openssl")
	# endif()

	set(CRYPTO_LIBS ${OPENSSL_LIBRARIES})
	set(CRYPTO_INCLUDE_DIRS ${OPENSSL_INCLUDE_DIRS}) 
	set(CRYPTO_LIBS_ABSTRACT_NAME crypto ssl)

	set(CLIENT_LIBS ${CURL_LIBRARIES})
	set(CLIENT_INCLUDE_DIRS ${CURL_INCLUDE_DIRS}) 
	set(CLIENT_LIBS_ABSTRACT_NAME curl)
# endif()

#Compiler flags
list(APPEND SDK_COMPILER_FLAGS "-std=c++11")
if(CMAKE_CXX_COMPILER_ID MATCHES "MSVC")
	list(APPEND SDK_COMPILER_FLAGS "/MP")
	if (NOT ENABLE_RTTI)
	list(APPEND SDK_COMPILER_FLAGS "/GR-")
	endif()
elseif (CMAKE_CXX_COMPILER_ID MATCHES "Clang")
	list(APPEND SDK_COMPILER_FLAGS "-fno-exceptions" "-fPIC" "-fno-rtti")
	if (NOT ENABLE_RTTI)
	list(APPEND SDK_COMPILER_FLAGS "-fno-rtti")
	endif()
	
	list(APPEND SDK_COMPILER_FLAGS "-Wall" "-Werror" "-pedantic" "-Wextra")
else()
	list(APPEND SDK_COMPILER_FLAGS "-fno-exceptions" "-fPIC")
	if (NOT ENABLE_RTTI)
	list(APPEND SDK_COMPILER_FLAGS "-fno-rtti")
	endif()
	
	list(APPEND SDK_COMPILER_FLAGS "-Wall" "-Werror" "-pedantic" "-Wextra")
	
	if (ENABLE_COVERAGE)
	SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage")
	SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage")
	SET(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage")
	endif()
endif()


if (BUILD_SHARED_LIBS)
	set(STATIC_LIB_SUFFIX "-static")
else()
	set(STATIC_LIB_SUFFIX "")
endif()

include(ExternalProject)
include(GNUInstallDirs)

add_subdirectory(sdk)

if(BUILD_SAMPLE)
#	add_subdirectory(sample)
endif()

if(BUILD_TESTS)
#	add_subdirectory(test)
#	add_subdirectory(ptest)
endif()

轉載請註明出處，本文鏈接：https://www.uj5u.com/shujuku/198144.html

標籤：其他

上一篇：rtmpdump命令列詳解

下一篇：鏈表入門代碼